Hybrid Tower
Bögl

Hybrid Tower Bögl: 200 meter hub height for efficient wind energy.

Wind energy is an indispensable key technology in our energy transition. Just as indispensable is the tower for a wind turbine as a stable anchor between the turbine, which weighs tons, and the force of nature that is wind. With our Hybrid Tower Bögl, we are setting new standards in the wind industry to drive forward the energy transition.

Cutting-edge technology in wind energy: revolutionary developments for the energy transition

Innovative hybrid towers for maximum yield and efficient power generation

The development of new technologies in wind energy has accelerated rapidly over the last ten years. In the past, a wind turbine could only supply a fraction of households with electricity. Today's turbine generations now exceed this by a factor of a thousand - not least thanks to our innovative hybrid tower system, which lifts the turbines into the high-yield, linear wind zones with optimum hub height - even at low-wind locations.

Advantages of the Hybrid Tower Bögl

Tested and proven technology

Economical solution made of steel and concrete

Maintenance-free concrete tower

Transport with standard trucks

Short delivery and installation time

Advantages over conventional all-steel towers

Lower CO₂ footprint

More cost-stable material

Higher hub height

More stability thanks to concrete

Lower maintenance than steel

Cheaper and easier transportation

50% less CO2 emissions than a conventional steel tower

Despite concrete, up to 50% fewer emissions than a comparable conventional steel tower

The life cycle assessment of the Hybrid Tower Bögl showed that a steel tower of comparable height causes up to 50% more CO2 equivalents over its life cycle – even though the hybrid tower consists largely of concrete elements. By using environmentally friendly concrete, in which up to 60% of the cement content in the concrete mix is substituted, up to 50% in CO2 equivalents could be saved.

Reliable turnkey partner for your energy projects

Faster and more economical implementation of wind energy projects through comprehensive solutions

The satisfaction of our customers is our top priority. Our team's most important goal is therefore to impress with our many years of experience and top-quality products. We offer a comprehensive overall package for our hybrid tower and thus minimize cost and time-intensive interfaces between the individual trades and construction phases. This enables us to implement Windenergy projects more quickly and economically and actively drive forward the energy transition.

Wind energy in demand like never before: Over 1,000 hybrid towers per year

Energy transition drives expansion of renewable energies

Demand for onshore wind turbines is increasing due to ambitious expansion targets. In order to meet this demand, we now produce over 1,000 hybrid towers per year at three production sites in Germany. In doing so, we are also making a significant contribution to providing the necessary capacity for the rapid expansion of wind energy.

Transportation and logistics

The control of the entire project logistics and the safe transportation of all tower components is carried out by a separate division, which ensures precise, punctual and economical work over long distances. Thanks to our large fleet of vehicles, we can transport the segments and components flexibly and independently. We also use waterways, for example the North Sea at our Emden site and the Kiel Canal at our site in Osterrönfeld.

Foundation works

The hybrid tower is based on a ring foundation made of in-situ concrete in order to safely transfer the loads from the wind and the weight of the turbines into the ground. Our experienced foundation construction team takes care of the entire construction process: from creating the clean layer and installing the reinforcement to concreting and post-treatment of the foundation and, if necessary, the required special foundations.

Tower installation

On construction site, we ensure the smooth installation of the concrete tower and system components. Using specially developed assembly devices, the segments manufactured in the factory are joined together on site to form complete rings. The concrete parts, which are grinded using a CNC machine, are then placed precisely and quickly on top of each other in a "dry joint". This construction method makes it possible to erect towers in almost any weather conditions.

<h2><span class="font-size-34px"><b><span class="font-green"><span class="font-h3">Reliable turn-key partner for your energy projects</span></span></b></span></h2>
<h2>Transportation and logistics</h2>
<h2><span class="font-size-34px"><b><span class="font-green"><span class="font-h3">Reliable turn-key partner for your energy projects</span></span></b></span></h2>
<h2>Tower mounting</h2>

Would you like to find out more about our tower?

Contact us now for detailed information on how we can configure our tower to meet your requirements. Our team of experts will be happy to advise you and answer all your questions.

Contact form